Grey- Flow PS PP Automatic Cleaning



Grey Flow PS PP Automatic Cleaning

2-Stage install

The Grey Flow PS 2-Stage install System is a “whole of house” greywater diversion system that is installed below ground. Is it installed within the house plumbing at pre-lay stage up to 3 metres deep and is ideal for tight and narrow sites. The Grey Flow PS has Watermark certification and is approved for use in all states. This greywater system can fit any house conditions and sizes. Grey Flow PS greywater recycling system is known for its robust design and will ensure you a trouble free greywater system.

– Compact system ideal for tight and narrow sites
– Small footprint that would fit almost any site conditions
– Easy to install with reduced excavations requirements
– 100mm Inlet and outlet for “Whole of the House” and commercial applications
– Can spread the Greywater over a large garden area
– Combined with the 6 stations GF-Rotor and the Grey Flow Drip-Tube the system can cover a garden area as large as 480 square meters

The GreyFlow PS 2-Stage Install was developed specifically for new homes on slab, where the greywater waste pipe is located 100mm or more (up to 3m deep) below ground level. The system is a “whole-of-house” greywater diverter with a 100mm inlet and overflow pipe connection.

The 2-Stage installation process is ideal for new homes on slab where the sewer piping is performed at a pre-lay stage before the house walls are erected. The first stage consists of installing the basic carcass of the system

“Builder’s Kit” at the same time as the plumbing is being layed in the ground by a license plumber. This results in considerable costs saving to the home owner.

The second stage”finishing kit”is to be installed when the house is nearing completion before the outside paving is laid. The”finishing kit” comes in a manual and an automatic filtration option and does not require to be installed by a license plumber. If the self-cleaning option is selected, it is strongly recommended that the “finishing kit” be installed by one of AWWS accredited installers. AWWS offers a two year warranty when the “finishing kit” and dripline system is installed or signed off by an accredited installer.

Additional information

Weight 50 kg